How to reset bmw e60 oil service

To reset the oil service light on a BMW E60 (5 Series, 2003-2010), follow these steps:

1. Turn on the ignition: Insert the key into the ignition slot but do not start the engine. Turn the key to position 1 (first click) or position 2 (second click) depending on the model.

2. Press the trip reset button: Locate the trip reset button on the dashboard (next to the speedometer or odometer). This is typically a small button that resets the trip odometer.

3. Hold the trip reset button: Press and hold the reset button until the oil service light starts to flash or until it changes to the reset mode. This usually takes about 5-10 seconds.

4. Bmw e60 oil service reset: Once the light begins to flash, release the button. The display should change to indicate that the oil service light is being reset.

5. Confirm the reset: After about 5-10 seconds, the service light will either go off or display the new service interval. If it does not, repeat the procedure.

6. Turn off the ignition: Turn the key back to position 0 to turn off the ignition. Start the car to check that the oil service light is no longer on.

If you have the BMW iDrive system:

1. Turn on the ignition to position 1 or 2.
2. Press the "Menu" button on the iDrive controller to bring up the iDrive menu.
3. Select "Vehicle Info" and then go to "Vehicle Status."
4. Select "Service Required" and then choose "Engine Oil."
5. Press the "Reset" button and confirm.

This procedure should clear the oil service light and reset the oil change reminder.