How to reset bmw brake warning light

To reset the BMW brake warning light after replacing the brake pads and/or sensors, follow these steps:

1. Turn on the ignition without starting the engine. Press the start/stop button without pressing the brake pedal.
2. Locate the BC button on the turn signal stalk or steering wheel.
3. Use the BC button to scroll through the menu until you see the service icon or the warning light for the brakes.
4. Bmw brake warning light reset: Once on the brake service menu, press and hold the BC button until "Reset" appears.
5. Release the button, then press and hold it again until the reset process begins. You might see a progress bar during the reset.
6. Wait for the reset to complete. The brake warning light should turn off.
7. Turn the ignition off, then back on to verify the reset was successful.

If the warning light persists (BMW brake reset unsuccessful): Check the brake wear sensor for proper installation and ensure it. Verify the brake fluid level. Scan the system with an OBD-II diagnostic tool to check for other issues.
If you still encounter issues, let me know the specific model and year of your BMW for more precise assistance! Like: Bmw x3 brake pad warning light reset